Using silicate-alumina-magnesium series as the raw material, we
twist it to produce S-glass yarn. The sizing is silane type and has good
performance of corrosion-resistance. Filament diameter is 8um, and it
is 34tex or 68tex, which is specially used to weave S-glass fabric. Whole
bobbin is supplied with net weight 500g.
|FIBERGLASS SMC ROVING
It is roving to make SMC material sheet and can compatible with resin
well. It has good stiffness,, easy cutting and low static. And the fiber is
well-proportioned when mold to SMC. Filament diameter: 11μm or 13μm
Roving density: 2400 tex or 4800 tex
It can compatible with epoxy and polyester resin.
Packing: One 20’container can load 20 pallets, total 18 tons.
|LOSE FIBERGLASS SILVER AND TAPE
It is E-glass roving via hacking and loosing with free of any binder, the
filament diameter is 7μm~11.5μm, the length is 50mm~200mm.The
material is alkali and acid resistance. And the standing temperature is
from -40°C degree to 635°C degree. It is the raw material of atmosphere
filter, special made to tape and mat of sound insulation and heat
One 40’HQ can loads 9 tons with compressing packing.
|FIBERGLASS TWISTED YARN
It is yarn that after receding and twisting fiber with diameter of 5.5μm,
8μm, 9μm and 11μm and be used to make various fiberglass fabrics.
Specification: EC75, EC150, EC225, EC450, 1/0, 1/2, 1/3, 1/4.
Twist: 28~140 per meter, Z or S.
Packing: One 20’ container can load 8 tons to 12 tons
Note: If inner bobbin with paper corn, then net weight of roving is 500g.
If inner bobbin with plastic core, then net weight of roving is 3kg.
|FIBERGLASS TEXTURIZED YARN
It is yarn that is bended and texturized by high pressure air and can be
used to make fabric for filtering and insulating.
Standing temperature: 550°C
Low conductive coefficient: ≤0.035kedl/m.h.°C
Filament diameter: 9μm or 11μm
Roving density: 430tex~2400tex
Packing: one 20’container can load 8 tons.
|PTFE COATED FIBERGLASS YARN
It is made by normal fiberglass twisted yarn coated with PTFE.
|GLASS STAPLE-FIBRE YARN
It is processed by C-glass napped fiber with diameter of 10.5μm and sight
twist. This kind of yarn is anti-corrosion, anti-animalcule, non-burning
and has good character of sound insulation and soakage with resin, which
is used to make water-proof decorating wallpaper and as the based
material for battery separator producing and also to be filter yarn for
Yarn density: 156tex~1200tex
Delivery: in roll.
|BASALT NON-TWIST ROVING FOR WEAVING
It is the roving for weaving made by basalt fiber of filament diameter 9μm
Yarn density: 200 tex, 300 tex, 400 tex, 600 tex and 800 tex.
|PVC COATED FIBERGLASS YARN
Based on fiberglass yarn, coating PVC which meet European Union’s
requirement of Environment protection on each filament of yarn.
Diameter: 0.28mm, 0.33mm, 0.35mm
If you have special requirement of diameter, we can also process it.
|C-GLASS NON-TWISTED THIN ROVING
Our company can produce C-glass non-twisted thin roving with low tex
value of 100tex ,200tex, 300tex, 400tex, 600tex and 800tex which to be
woven of mesh and fabric. Each bobbin weights 6kgs or 18kg.
| PULTRUSION ROVING
It is roving as reinforced material in the process of FRP pultursion
molding. The roving has properties of congruous tension, few fluffy and
can saturate with resin fast.
Filament diameter: 11μm or 13μm
Roving density: 800tex, 1000 tex, 1200 tex, 1600 tex, 2400 tex, 4400 tex,
4800 tex, 8000 tex, 9600 tex, 10000 tex are available.
Finish: silane. It can compatible with epoxy and polyester resin.
Packing: One 20’container can load 20 pallets (10 pallets: 64 bobbion/
pallet and 10 pallets: 48 bobbion/pallet), total 19.2 t.
It is alkali resistant roving which used as reinforcement in cement and
There are two kinds roving according to different ZrO2 content of 14.5%
and 16.5%. As to usage, there are two types, one is premixed type and
another is water-dispersed type.
Filament diameter: 13μm
Roving density: 2400 Tex or 4800 Tex
Packing: One 20’ container can load 20 pallets, 48 cartons per
pallet(namely 912kgs), total 18.24 tons.
Note: We can chop roving into strands with certain length. In case of
6mm, it is 25kg/bag, 40bag/pallet, one 20’container can load 20pallets,
total 20 tons. In case of 12mm, it is 20kg/bag, 40bag/pallet, one
20’container can load 20pallets, total 16 tons. In case of 24mm, it is
15kg/bag, 40bag/pallet, one 20’container can load 20pallets, total 12
tons. If mixed loading, we can calculate quantities for clients.
|S GLASS ROVING (HIGH STRENGTH ROVING)
The high strength fiberglass belongs to the magnesium-alumina-silicate
glass system. Compared with E fiberglass, they have 30-40% higher tensile
strength, 15-20% higher modulus of elasticity under condition of 4020,
4600MPa, 100-150oC higher temperature endurance under condition of
82.9, 86.4GPa, 10 times higher fatigue resistance. It also has excellent
properties of impact-resistance, corrosion-resistance and it is good wetout
with resin. The roving is always used to make oxygen tank and high
The popular specification:
Filament diameter 8μm---240TEX, 480TEX, 960TEX, 1200TEX
Filament diameter 11μm---240TEX, 480TEX, 960TEX, 1200TEX, 2400TEX.
|HIGH STRENGTH ROVING
This kind of roving is specially designed for filament winding and
pultrusion processes, compatible with epoxy resins, with curing agent of
acid anhydride or amine. Finished product has good wearing resistance,
low fuzz, efficiently compatibility with resins. It could meet the high
bursting strength request, offering most high mechanical strength for
pipes or containers. It’s suitable for high pressure pipes and pressure
Specifications: 735tex, 1100tex, 2000tex
Code J201 equals to code OC1588 acid anhydride
Code J202 equals to code OC2348 amine
Net weight of each bobbin is 16kg and one 20ft container loads 20 pallets
(48 bobbins/pallet----10 pallets, 64 bobbins/pallet-----10 pallets)
The annual output by tank furnace is 30,000 tons, with competitive price.